-
Power steering orfice.
Have a KRC power steering pump, stock GM box and a 2:1 quickener on my Super dirt stock. Hard to turn wheel at idle, and not alot of assist on the track. I think its too small of an orfice. Size E is the biggest orfice KRC makes and was thinking about buying it to try out. What size orfice is everyone using?
-
I doubt your pump orifice is the problem. More likely its the "T bar" valving in your stock box that cant move twice the fluid due to the 2-1 quickner. You need to be .170 - .185 with a 2-1 quickner and you can steer with one finger. You can look for a used box or I use PSC Steering box's. You can get a 700 series sportsman box at 12-1 and .185 valving for $295.00. Many like Sweet, that same box from sweet will cost over 400.00.
Dave
2012 UMP Stock Car National Champions.
2013 UMP Modified Rookie of the Year
2014 Kankakee Speedway UMP Modified Champion
2016 Fairbury American Legion Speedway UMP Modified Champion
2016 Kankakee Speedway UMP Modified Champion
2016 UMP Modified, Northen IL Regional Champion
2018 UMP Modified, #2 National Points Standings
Like us on Facebook,
https://www.facebook.com/McKinneyMotorsports
-
Had that same problem a few yrs ago. Drilled mine to 5/32", no problems since.
-
I had the same problem. Racer96 has the answer. I purchased a sweet steering box with .185 valving and it's amazing the difference. Then I purchased a box all-star sells for around 220$ with the same .185 valving. http://www.allstarperformance.com/product.htm?prod=1193 the all-star box has the sweet name stamped in the housing.
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
All times are GMT -5. The time now is 11:28 AM.
Bookmarks