Rules say we have to run a solid pull bar... no springs, no bushings, no nothing..... 09 shaw with the short pull bar... car has no other mounts..... rules say we have to run the springs on the housing, 3 link.....asphalt pull offs for tires....
Car doesn't have a lot of forward bite....
So if you were going to put a long pull mount on it... where would you go with it ? Drive shaft loop ? Maybe go crazy and try something trick and non-conventional ? Maybe cross the driveshaft and go towards the RF tire ? I am open to any crazy idea !!
 |
||||||
 |
||||||
|
||||||
|
||||||
|
||||||
|
||||||
 |
Results 1 to 3 of 3
Thread: solid pull bars
-
05-25-2016, 05:19 PM #1
Senior Member
- Join Date
- Mar 2011
- Posts
- 197
solid pull bars
" Most of my drivers have been new to 4 link stuff and I believe most of their chassis issues are really my driver issues....... "
see ya
johnny v
-
05-26-2016, 07:10 PM #2
Senior Member
- Join Date
- May 2007
- Posts
- 2,814
Mines to the drive shaft hoop 35 in long
-
05-26-2016, 07:28 PM #3
Senior Member
- Join Date
- Dec 2007
- Posts
- 662
We have a stock clip 3 link limited car our pull bar is 48" long angled toward RF I also have pull mounted in front of quick change centerline to make it pull harder and longer if you mount it over center of rear axle as car squats the top link rolls over center and loses leverage with it in front of centerline it does not go over center.
Reply With Quote
Posting Permissions
All times are GMT -5. The time now is 08:09 PM.
Bookmarks