-
j bar pinion seal
ive got an 09 BWRC with i assume to be a TWM pinion mount with the seal built in. I'm needing to replace the seal and the only number i found was on the rubber and not pulling up much with a google search. anyone have a cross reference number for the parts store? thanks
-
Originally Posted by
riddle28
ive got an 09 BWRC with i assume to be a TWM pinion mount with the seal built in. I'm needing to replace the seal and the only number i found was on the rubber and not pulling up much with a google search. anyone have a cross reference number for the parts store? thanks
It depends on how thick you need it to be.
AllStar sells several replacements and the difference is thickness.
ALL72145 is 5/16" thick
ALL72544 is 1/2" thick
ALL72543 is 3/4" thick
-
Originally Posted by
Matt49
It depends on how thick you need it to be.
AllStar sells several replacements and the difference is thickness.
ALL72145 is 5/16" thick
ALL72544 is 1/2" thick
ALL72543 is 3/4" thick
Off topic, but I continue to be amazed with how much @#$ you know about all of this.
Just a tip of the hat in your direction, Matt49
-
-
Originally Posted by
RacerX10
Off topic, but I continue to be amazed with how much @#$ you know about all of this.
Just a tip of the hat in your direction, Matt49
Thanks. I spend all winter browsing parts catalogs so that when I need something I know exactly where to find it. There is always a stack of catalogs at least a foot tall on my office desk.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
All times are GMT -5. The time now is 03:46 AM.
Bookmarks