Results 1 to 5 of 5
  1. #1
    Join Date
    Aug 2014
    Posts
    101

    Default 461 vs 882 heads. Power increase?

    guys I have a USRA bmod with nice flat top motor and im thinking about switching to imca Amod. not looking to win just have some fun. the track i run is a 3/8's that is very dry slick. current motor. prc108 cam, 6" rods, flat top pistons, zero decked, 882 heads, 9-1 comp, 2701 intake with a 4412 carb. new combo same bottom end and cam, add 461 heads that are 64cc, new intake(not sure which one), and a 750 4 barrel. what hp gain would i see with the new combo? NO IM NOT DOING VORTEC HEADS BECAUSE I ALREADY HAVE THE 461's. maybe next year will get some darts.

  2. #2
    Join Date
    Aug 2014
    Posts
    101

    Default

    nobody uses double hump heads anymore?

  3. #3
    Join Date
    Jun 2013
    Posts
    307

    Default

    You will gain probly 10-15 hp just because of the compression increase should be at 10.5 now with the smaller combustion chambers. It all depends how much work has been done to either set of heads, but the 461s are definitely a better set of heads than the 882s which are junk IMO.

  4. #4

    Default

    Maybe another 25-30 HP going to a 750 4 barrel carb.

  5. #5
    Join Date
    Aug 2014
    Posts
    101

    Default

    thanks guys. I would hope that since the crate 604's are doing good on our dry slick track with 400hp that my combo should be close and at least be able to have fun and be able to stay out of the way.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 09:40 PM.


Powered by vBulletin® Version 4.2.0
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.