Results 1 to 3 of 3
  1. #1
    Join Date
    Feb 2009
    Posts
    470

    Default Lost low gear in my Bert Transmission

    After the feature last night, as the car idled down I shifted back to low to pull in the pits, however low gear didn't work anymore. I shifted back to neutral and then into low and nothing. I'm taking it to be looked at but has anyone experienced this before? Its a regular Bert ballspline. I just like a heads up so I know about what he's gonna say.

  2. #2
    Join Date
    Jan 2015
    Location
    Wisconsin
    Posts
    56

    Default

    Did you also loose reverse? Do you have a firm clutch pedal? If you lost low and reverse AND have a soft brake pedal you have a hydraulic problem (bad clutch master cylinder, bad fluid cylinder cup in the tail stock, or leaking clutch hose. If you lost low and reverse AND have a firm clutch pedal you may have tore up the clutch discs. If you still have reverse and only lost low gear you may have bent the shift fork (you would have really had to force the shifter to do this). Check your fill plug to see if you have any large shrapnel on it.
    Last edited by petesbuyin; 09-04-2016 at 07:23 PM.

  3. #3
    Join Date
    Jun 2010
    Location
    Santa Land
    Posts
    554

    Default

    Sounds like the clutch is out.
    My sarcasm is a pre-emptive strike to your stupidity!!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 04:31 AM.


Powered by vBulletin® Version 4.2.0
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.