Results 1 to 6 of 6
  1. #1

    Default Tandem pump rebuilds

    Have a KSE tandem pump I'd like to get rebuilt. Wondering who does these?
    Any leads are appreciated. Thx.

  2. #2
    Join Date
    Sep 2009
    Posts
    407

    Default

    Send it to KSE. They have always done me right. Just make sure your tank is vented.

  3. #3
    Join Date
    Jul 2014
    Posts
    399

    Default

    X2, best way to go, I don't care much for the fuel side, but many use them and they work well, if yours has a definitive problem, fuel part damaged by methanol, your likely better off replacing the whole unit.

  4. #4
    Join Date
    Jan 2012
    Posts
    332

    Default

    Mine had been ran dry because I had a servo leak so I had to have a new housing. For it and their tricked out reservoir it was 450 after they quoted me 550. I was satisfied.

  5. #5
    Join Date
    Jul 2007
    Posts
    538

    Default

    I've ran the same ole KSE tandem pump for 15yrs now. Used to run alcohol thru it, now days its gas. I've put a new plate in it due to alcohol corrosion and a new shaft when I mounted it on the back of the oil pump. Been an excellent piece. Zero problems. I always send it to KSE and have always been happy with their service.

  6. #6
    Join Date
    May 2007
    Location
    Kansas
    Posts
    1,940

    Default

    They aren't hard to rebuild at all, the biggest problem is people don't mark the plates for direction and assemble them wrong. Just take a punch or stamp and mark each section towards the front or back and all in line with each other, so you know which direction is forward or backwards. it's real easy to put one of the center sections in backwards and it won't pump fuel.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 08:09 PM.


Powered by vBulletin® Version 4.2.0
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.