Results 1 to 5 of 5

Thread: Pierce modified

  1. #1
    Join Date
    Oct 2013
    Posts
    21

    Default Pierce modified

    On a clamped car. Lr clamped. Is it necessary to have a lift bar and a pullbar? Looking for help thanks

  2. #2
    Join Date
    May 2007
    Posts
    2,814

    Default

    No. ,you have to have the right pullbar if you don't run the lift arm setup from pierce

  3. #3

    Default

    Just need to install a pull bar with a brake biscuit on it and you're good to go. The pierce pull bar does not have it, so you do have to buy a different pull bar.

  4. #4
    Join Date
    Jan 2015
    Posts
    1

    Default

    does the pierce pull bar use a spring or is it just the biskets. my car came with a lot of parts nothing installed. I have three pull bars but not sure which goes in. clamp lr also.

  5. #5

    Default

    Just a spring. The pierce pull bar doesn't have a brake biscuit or anything, that's what the lift arm is used for.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 02:32 PM.


Powered by vBulletin® Version 4.2.0
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.