Spring Smasher

[collateralDamage]

I did a search, hopefully this isn't a redundant question....

I've used an Accuforce standard. The actuator switch works smooth and the integrated display is nice too. The only thing I don't like is the price.

Who has any deals for PRI? Who has the best unit for the dollar w/unloader cash buyer?

Another way to ask this: If you had $3000 to spend and not a penny more, what would you buy?

[sidewinder69]

look up boyd bilt . identical unit for less than 3k

[Punisher88]

Do some research and build your own for much cheaper. You will have to use a air over hydraulic jack but still works just fine. I built my own for 1200 with the exact same digital read out load cell digital measuring readout for the travel distance and an air over hydraulic 8 ton bottle jack.

[collateralDamage]

look up boyd bilt . identical unit for less than 3k

do you have their contact info? i say something on them on fb a while back. will they be at pri? is it the same as the sheet metal break company?

[zeroracing]

I make a portable machine, have one 3,000 available for pickup at PRI, $2,350 and one 4,500 unit available for pickup at PRI for $2,650.

Www.facebook.com/ultraforcespringmachine

All electric, built for zero flex, 110v standard plug.

[zeroracing]

I forgot to add my contact info, 417-322-9667, I will be delivering multiple units and these two are first come first serve, i will have more after PRI but these will be done for PRI. We will be at PRI in a booth operating the machine.

These are both push and pull machines, the 4,500 is more for modified use on pull bars.

[FlatTire]

Zero- we need to meet up at PRI, what booth will you be in ?

[zeroracing]

Wehrs machine

[MLR19]

We have a new 110V model that will be on display at PRI $1799 Racer price. Should have pics on the website in a couple of days.

Thanks, Larry

[fastford]

Do some research and build your own for much cheaper. You will have to use a air over hydraulic jack but still works just fine. I built my own for 1200 with the exact same digital read out load cell digital measuring readout for the travel distance and an air over hydraulic 8 ton bottle jack.

punisher , i think he wants to spend the money , but i like your idea , may PM you later for some info......

[Brian Gray]

I built nearly a hundred of them. Forget the air over hydraulic and just get an electric trailer jack. Been selling them in kit form for 750

[Punisher88]

Brian can you p.m. me the trailer jack you use? I've seen them but wasn't sure about the max load.

[MLR19]

Pics of the new Spring rater are up on the website

http://mlrfab.com/rater.php

Thanks, Larry

[dorman19]

coil over load smasher at a reasonable price
http://www.ebay.com/itm/coil-over-lo...xYRKSp&vxp=mtr

[chop6259]

MLR19, what is your booth number at PRI?
Joe
www.bartlettmotorsportengineering.com

[MLR19]

Booth # 6010

[MLR19]

Thanks to everyone who stopped by the booth at PRI. The response to the new spring rater was overwhelming to say the least.

Thanks again

[CHIP DAWH]

what is the wait time to get a new machine? Also are they still available at show price?

[MLR19]

Price is $1799 plus shipping, we are taking pre-orders & if you ordered one today, it would ship by 1/14/16.

Thanks

[CHIP DAWH]

Thanks, I will call you in the next day or so.