04 Rayburn with 10 updates pull rod issue

[Fireracer18]

Have 04 Rayburn with 10 updates came with pullrod installed does it require a spring on it any info would be helpful

[2old4this]

Call rayburn...

[Fireracer18]

Rather not call Rayburn any one have a picture of a Rayburn pull rod

[MasterSbilt_Racer]

The spring goes inside the pullbar body. Typically, you have a brake spring on the "lift bar."

[Fireracer18]

OK that makes sense is there any adjustments to it and do u unhook it to make adjustments to the car

[old17ford]

OK that makes sense is there any adjustments to it and do u unhook it to make adjustments to the car

Give Jay johnson a call at 229-344-8868 after 5 est he can tell you what u want to know .

[swingarm4life]

Does it have a pullbar and braking bar, or does it have a pull bar with a lift bar and 6th coil?

[Fireracer18]

Swingarm4life it has a lift arm and 6 the coil with a pullbar

[Fireracer18]

Finally got time to take the pull bar off tonight took it apart no spring inside so guess now I'm needing to bye a spring for it and once I get the spring is there anything to adjust as far as preload

[Stede Bonnet]

Finally got time to take the pull bar off tonight took it apart no spring inside so guess now I'm needing to bye a spring for it and once I get the spring is there anything to adjust as far as preload

You scale the car with the pull bar disconnected, once scaled reattach bar and preload. I just can't remember how much, but I think its 1 turn or 1-1/2. The spring is whats called a punch press spring(dark green).

Mc MAster Carr #9595K17, 2 inch spring. $15.65 each
https://www.mcmaster.com/#9595k17/=162x2bo