Results 1 to 6 of 6
  1. #1
    Join Date
    May 2007
    Location
    Dallas, GA
    Posts
    328

    Default 2300 Ford Parts - cleaning out the garage ....

    .060 over block, casting D8EE (large journal, 2 piece rear main seal), tanked, magnafluxed, sonic checked for cylinder wall thickness and integrity, bored 60 over, align bored, and decked - $400

    D-port closed-chambered head, tanked, magnafluxed, and surfaces trued (never cut), standard valve grind. She's a virgin, ready for your machine work - $250

    Shop motor stand - will accomodate your spare motor, even including racing oil pan. Comes with mounting bolts (nuts welded to stand for staorage when not in use) - $150 with the wheels, $100 without (will slide effortlessly across a concrete floor without them, motor NOT included)

    Pristine Auxilliary shaft with fuel pump lobe - $100 (going for over $300 on ebay right now)

    Ford Racing multi-key cam gear - $40

    2300 valve spring compression tool - $75

    JBV-Heads EFI to Holley carb adaptor (this is the GOOD one, flows better than any other) - $150

    Esslinger crank pulley, 2 different water pump pulleys, and the belts needed for either - $75

    Melling M86C oil pump - $40

    Full set of Perfect Circle hydraulic lifters - $50

    New set of MSD 8.5 mm plug wires - $50

    1900cc Pinto 7.5" clutch discs (when used with the Escort flywheel and pressure plate, this is the lightest "stock" clutch you can run) - 5 of these, $30 each, all 5 for $120

    Ford factory neopreen valve cover gaskets (these are the GOOD black ones, that will not stretch out like the blue Felpro ones, so can be re-used multiple times) - 6 of these, $20 each, all 6 for $100


    All reasonable offers will be considered. Would prefer to not ship the block or head. Pictures available upon request.
    I don't suffer from insanity ... I enjoy every minute of it!


    http://www.Scalded-Dog-Racing.com

  2. #2
    Join Date
    Jan 2013
    Posts
    10

    Default 2300 engine parts

    Can you give me the casting # from the head. Thanks.

  3. #3

    Default

    hi my name is Ashley can u please email me pics of parts for sale please ashley@ashrome.co.za

  4. #4
    Join Date
    Mar 2017
    Posts
    4

    Default

    if you want to sell.....answer the (not a nice word)(not a nice word)(not a nice word)(not a nice word)in post....put (not a nice word)(not a nice word)(not a nice word)(not a nice word) on here and never answer

  5. #5
    Join Date
    May 2007
    Location
    Dallas, GA
    Posts
    328

    Default

    Ya know, I put these out here, watched religiously for a couple of weeks, saw there were no views on the thread, no replies, no personal messages, nothing. So listed the same parts at other sites. Sorrym but as I no longer race, this board is no longer part of my daily routine. So polarisman? Piss off.
    I don't suffer from insanity ... I enjoy every minute of it!


    http://www.Scalded-Dog-Racing.com

  6. #6
    Join Date
    May 2007
    Location
    Dallas, GA
    Posts
    328

    Default

    (If this board offered an option to delete threads you started, I would have done so when I listed these parts elsewhere)
    I don't suffer from insanity ... I enjoy every minute of it!


    http://www.Scalded-Dog-Racing.com

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 12:29 PM.


Powered by vBulletin® Version 4.2.0
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.