Results 1 to 4 of 4

Thread: Metric car

  1. #1
    Join Date
    Apr 2017
    Posts
    2

    Default Metric car

    I am very new to metric cars and am building a monte carlo, I have heard of guys running nova lower control arms and different spindles. Has anybody experimented with that? If so what width rear end did you run? The track i am racing at only has the rules that it has to be stock mount in the stock location. Also is leading the lr forward a good thing to do and if so how much for a smaller 3/8 mile track? Thanks!

  2. #2

    Default

    If I'm not mistaken the nova lowers and different spindles changes the wheelbase. And I run my rear end fairly square

  3. #3
    Join Date
    Jun 2007
    Posts
    570

    Default

    our driver didn't like leading the lr either.

  4. #4
    Join Date
    Feb 2008
    Location
    Pennsylvania
    Posts
    185

    Default

    Nova lowers will widen the track by about 2" and push the wheels ahead about an inch. You have to use older Rear steer Nova lowers and swap sides. Left on Right and right on Left.
    If your driving on the edge, you are trespassing on my property!!!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 08:42 AM.


Powered by vBulletin® Version 4.2.0
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.