Results 1 to 4 of 4
  1. #1
    Join Date
    Jan 2014
    Posts
    28

    Default Leaking bert trans

    My bert is leaking towards the front and coming out of the bell housing. I took it out and put a new front seal in and re-sealed everything and put it back in and it still leaking after that. Where could it be coming from? I dont see anything obvious.

  2. #2
    Join Date
    Aug 2016
    Location
    Central PA
    Posts
    14

    Default

    It's leaking where the lower shaft goes in the case

  3. #3
    Join Date
    May 2007
    Location
    Mystery,IN
    Posts
    90

    Default

    There is a o-ring on the lower shaft that goes thru the case and clutch assembly. Look at a picture of a bert disassembled and you will see it.

  4. #4
    Join Date
    Dec 2014
    Location
    pa
    Posts
    218

    Default

    mine always leaked when removed and reinstalled, dig out the old silicone, clean with 2+2, over fill area with new silicone and install while wet, all better tomorrow .

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 04:35 AM.


Powered by vBulletin® Version 4.2.0
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.