How much is too little or too much to use in the hubs?
I run a northern sport mod and I use the DRP grease, seals, and polished bearings.
I used to use implement grease and I didnt need to grease very often (lol) and i went to this stuff and from what I understood I could get a season out of it.
I use a syringe to apply the grease and go every-other bearing, sometimes every bearing and put as much in as I can. Then go back over the bearing once more. I rather have too much in there then not enough.
Just want to know what any one else is doing.
Pics are after 2 races.
Bookmarks