Rocket XR1

[rickybobby23]

How much can be saved by just buying a frame or frame and (not a nice word)(not a nice word)(not a nice word)(not a nice word)pit over a full roller and adding parts yourself? Is it worth it the price savings to add parts yourself? I haven't been around many XR1s so how hard would it be to get everything done correctly in our own shop?

[noral54]

very hard lots of xr1 parts only fit.. need their brackets and car is put together
different than blue cars

[TheJet-09]

Depending on where you are located, or how far you're willing to travel, try contacting MME in DeKalb, IL:

https://www.facebook.com/mmenterprises1

He can at least answer your questions.

[mickley.28]

I bought an xr1 with just the frame, decking and brake lines installed and put it together myself.... it wasn't hard but I had a good parts guy that races them and knew what parts i needed. Tye tworag is who i get all my parts through. he is very cheap and knowledgeable.