Results 1 to 4 of 4
  1. #1

    Default right front cut-off

    using a ball valve ,can i tee off the line coming from the master cylinder for the front brakes, run it to the ball valve then out off ball valve to the right front brake or is there a certain way it has to be done ?...... thanks

  2. #2
    Join Date
    Nov 2007
    Posts
    509

    Default

    I know everybody uses a r/f shut off, but I always have trouble with them. When you hit the brakes and have 600psi of line pressure the shut off will bleed a little bye. After doing this for several laps the r/f will start dragging.
    I went to a caliper with a small piston and then added a lever style proportioning valve.

  3. #3
    Join Date
    May 2007
    Location
    Kansas
    Posts
    1,935

    Default


  4. #4
    Join Date
    May 2007
    Location
    Kansas
    Posts
    1,935

    Default

    This allows any bleed thur that might happen from the ball valve and will return the pressure thru the one way valve and keep the RF from applying.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 04:00 AM.


Powered by vBulletin® Version 4.2.0
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.