What size master cylinder bores are you guys using? My old Mastersbilt has 1" pistons for all three cylinders... just wondering if that is what is being used today. I have Wilwood superlite calipers.
I'm rebuilding all the masters and installing new seals in the calipers.
 |
||||||
 |
||||||
|
||||||
|
||||||
|
||||||
|
||||||
 |
Results 1 to 4 of 4
Thread: Master cylinder info needed...
-
02-07-2018, 03:19 PM #1
Senior Member
- Join Date
- Nov 2012
- Location
- Wisconsin
- Posts
- 3,119
Master cylinder info needed...
Member of the Luxemburg Speedway Hall of Fame
Class of 2019
-
02-07-2018, 04:38 PM #2
Senior Member
- Join Date
- Jun 2007
- Posts
- 3,123
1" on both brakes and 3/4" on the clutch is pretty common.
-
02-07-2018, 06:47 PM #3
Senior Member
- Join Date
- Nov 2012
- Location
- Wisconsin
- Posts
- 3,119
Looks like I need at least one new master... got some pitting on one. Taking a closer look at the other one tonite.
I'm rebuilding the obsolete Howe clutch master the good old fashioned way... new brake cups! $1.05 rebuild.Member of the Luxemburg Speedway Hall of Fame
Class of 2019
-
02-10-2018, 08:34 PM #4
Senior Member
- Join Date
- Nov 2012
- Location
- Wisconsin
- Posts
- 3,119
Low and behold I was going thru some of my stuff and found a nice set of Wilwood pedals that I didn't even know I owned. Going to have to clean the shop more often!
Member of the Luxemburg Speedway Hall of Fame
Class of 2019
Reply With Quote
Posting Permissions
All times are GMT -5. The time now is 01:53 AM.
Bookmarks