Results 1 to 3 of 3
  1. #1

    Default Timing belt on aux pulley

    Our belt is running on the front edge of the aux pulley. We do have shims on the aux shaft but it still runs on the edge. Anyone ever run shims to space the pulley? This started when we changed heads. Same pulleys just a different head. I donít think the belt will come off, it just makes me nervous. Any advice?

  2. #2


    Make sure cam pulley belt quide is on and turned the right way. Make sure belt isn't too tight. I've never run shims on the aux pulley before. Make sure all pulleys match as far as square tooth or round tooth. Check belt tensioner for any play or bent. I had one the tensioner was a little bit bent and it ran the belt off.
    Last edited by Jb35; 02-28-2018 at 06:16 AM.

  3. #3
    Join Date
    Sep 2007


    cylinder head not cut true. without belt guides belt will run off


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

All times are GMT -5. The time now is 08:36 AM.

Powered by vBulletin® Version 4.2.0
Copyright © 2020 vBulletin Solutions, Inc. All rights reserved.