Could someone tell me the Howe ball joint number for a 2015 Black diamond right front lower? Thanks much
Do they use a screw in or uniball?
Member of the Luxemburg Speedway Hall of Fame Class of 2019
They use a screw in
Originally Posted by tornadochaser7 They use a screw in Should be 22430, which is a screw in with the Chevy taper on stud. I don't know if they use a longer or shorter Chevy pin or not but that is the std length one. Add an S on the end if you want a steel cap over the std aluminum one. To change pin length: -.3" 2243103 -.2" 2243102 -.1" 2243101 0 22430 +.1" 22431 +.2" 22432 +.3" 22433 +.4" 22434 +.5" 22435 +1.0" 224310
Last edited by billetbirdcage; 07-01-2019 at 03:28 PM.
Our 17 uses a 1/2 longer lower ball joint on the rf. I would just call BD to confirm they will tell you.
A 17 has different spindles than a 15 IIRC...(correct?), agree, call BD.
Did Stucky give you a part number?
Forum Rules
Bookmarks