Results 1 to 3 of 3
  1. #1
    Join Date
    Jun 2016

    Default Looking for some help IMCA Metric car

    Car is pretty good when there is moisture in the track. But junk when it slicks off. LF 1000 RF 1100LR 200 RR 175. 150lbs of bite. 53% rear. Offsets are 3's on the left side. 2" on the RF with a 1" spacer. 4 on the RR. Front stagger 2.5" rear 1". Just never feels like it's in the track. Any ideas

  2. #2
    Join Date
    Jun 2015


    Swap front springs. And maybe take front stagger down to 1. Take bite up to 180

  3. #3
    Join Date
    Jul 2007


    900 800
    275 250

    150 bite
    no lead behind the rear axle
    start with all your lead in one big pile about shoulder height, not spread around. the weight cant transfer if its spread all over

    Imca doesnt allow more offset than 2 inch so lose the 2 inch rf spacer, use it to adj on the lr with a 3 wheel or leave it off.
    My ignore list... copy pasted. Which means if your on here I DONT see your posts.

    ALLDIRT a1driver a25rjr balljoint balljoint_ calverton carowner73 CIRF Clayton_Wetter decrate61 dirtdobber45 dirtman007 frontrunner gator 49 LITE--OUT Raceready


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

All times are GMT -5. The time now is 08:56 AM.

Powered by vBulletin® Version 4.2.0
Copyright © 2020 vBulletin Solutions, Inc. All rights reserved.