Results 1 to 2 of 2
  1. #1
    Join Date
    Oct 2007
    Posts
    205

    Default 08 Mastersbuilt rear end setting

    I have a 08 Mastersbuilt. The set up book calls for a 18 3/8" or 21" J-bar. Assuming I have the correct brackets, this will pull the rear end too far to the left. Is there a measurement from the rear end to the frame that I can check to see if it is correct. This also has the 4 bars at an angle. But may have to move birdcages.

  2. #2
    Join Date
    Jun 2018
    Posts
    12

    Default

    We run 15 3/4 from inside of 90/10 plate to center of RR frame rail. Birdcages are 7.5” from inside of rotor to centerline of lower shock mount

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 12:24 PM.


Powered by vBulletin® Version 4.2.0
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.