Results 1 to 2 of 2
  1. #1
    Join Date
    Dec 2007
    Posts
    643

    Default front stub question

    anyone running a rack on a stock front clip and how is this done beside getting a rack and rack plate?

  2. #2
    Join Date
    Dec 2012
    Location
    DeWitt IA
    Posts
    269

    Default

    The biggest problem is getting the steering shaft out to the rack. I did use a steering box and on the pitman arm I ran a trailing arm over to a slider box that way it worked like a rack. But after doing all that work dont think it was worth it plus it got kicked out. What the slider box looked like a rack fact I used a old shaft from a rack and made a steel housing that had the same bolt pattern as a rack.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 05:43 PM.


Powered by vBulletin® Version 4.2.0
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.