Results 1 to 3 of 3

Thread: Moving halo

  1. #1
    Join Date
    Sep 2018
    Posts
    9

    Default Moving halo

    Trying to get other people’s opinions, rebuilding a old sportsman car to convert it to a street stock, I’m re clipping the rear back to factory and need to replace or rebuild the halo because it’s super narrow and to short, i was thinking about just using the old halo and bending a new one to go around the entire thing from the frame up and tiring it together. Does anyone see a problem with this other then weight? I feel like it would be twice as strong As a single one. But I’m not a professional. Thanks

  2. #2
    Join Date
    Dec 2007
    Posts
    662

    Default

    I have saw them done like that kinda strange looking but very strong. On my car I just redid it using 1\1\4 stubs inside 1.5 tubing pig welded in .I bent new 1.5 bars slipped over stubs left a crack at joints for penetration filled gap with weld then took a flap wheel ground weld flush. It's super strong. Just my opinion bugs that's what I would do.

  3. #3
    Join Date
    Nov 2012
    Location
    Wisconsin
    Posts
    3,119

    Default

    Done it myself like RW sez...
    Member of the Luxemburg Speedway Hall of Fame
    Class of 2019

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 09:13 AM.


Powered by vBulletin® Version 4.2.0
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.