Results 1 to 2 of 2

Thread: 90/10 shock

  1. #1
    Join Date
    May 2009
    Posts
    1,314

    Default 90/10 shock

    Not for a DLM for OWM. I remember old school 90/10 were mounted uphill to chassis now Iíve seen a few mounted virtually same angle as the pullbar which is right and why?

  2. #2

    Default

    The ďold schoolĒ mounting introduces too much angle in the 90/10 at a dynamic state. A lot of mods are running flatter pullbars now than they used to. Itís all about how the car act during the race, not in the pits. Also, a lot of the fast guys havenít used a 90/10 in several years. Some use basically a 0/0 as a safety tether in the event of a pullbar failure.
    Bill W. and Dr. Bob......who could have known.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 10:57 PM.


Powered by vBulletin® Version 4.2.0
Copyright © 2020 vBulletin Solutions, Inc. All rights reserved.