Results 1 to 2 of 2
  1. #1
    Join Date
    Jul 2018
    Posts
    5

    Default 2300 valve train geometry

    Can anyone give me a refresher on how to set proper valve train geometry on the sohc 2300 Ford?Thanks

  2. #2
    Join Date
    May 2007
    Posts
    2,319

    Default

    Shorten valve stem height to increase lift and lengthen to reduce. Set cam up for the lift at the valve. Cam says .630 lift and it measure .610 with zero lash then shorten the valve stem a little and remeasure. When lift at the valve matches lift on card within .005 or so you're good.
    BUCKLE UP NOW, YA HEAR?

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 11:05 PM.


Powered by vBulletin® Version 4.2.0
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.