Results 1 to 4 of 4
  1. #1
    Join Date
    May 2007
    Posts
    263

    Default WANTED: SBC 400 Main Crank With 3.5" or 3.48" STROKE

    Looking for small block Chevy crankshaft with 400 mains and a 3.5" or 3.48" stroke. You can call or text me at 314-374-5660.

  2. #2
    Join Date
    Dec 2008
    Location
    thedirtysouth
    Posts
    3,440

    Default

    you dont like using the thick main bearings ? they are better IMO because it slows the bearing speed down with the 350 jr.....we use federal mougle and never had a problem , any way i did have a 3.5 that needed the rods turned .010 , i will check on it and get back to you....

  3. #3
    Join Date
    May 2007
    Posts
    263

    Default

    Would you have a part number for the Federal Mogul thick bearings? I called today and they couldnt come up with it.
    Give me a call or text on your crank. Thanks! Steve

  4. #4
    Join Date
    Dec 2008
    Location
    thedirtysouth
    Posts
    3,440

    Default

    Clevite pt # - MS1564 P , they show 30 sets in inventory in std only and is a solid brg , now KING has the new spacer design , which allows you to use regular 350 brgs that you can get in anything , king pt # - MB5224 AM , this is the way i would go....BTW , I have either sold the crank or just cant find it , we did a lot of these several years ago for limited cars but we used a "327" crank ( 3.250 stroke ) because of 360 cid limit , they changed the rules and we have not done one in a while ....hope this helps....

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 06:24 AM.


Powered by vBulletin® Version 4.2.0
Copyright © 2021 vBulletin Solutions, Inc. All rights reserved.