Results 1 to 4 of 4
  1. #1
    Join Date
    Apr 2011
    Posts
    220

    Default Rear spoiler support bar

    Long shot here. 01 mastersbilt wide combo. Got into small wreck. Pretty much destroyed the rear t-bar support bar for spoiler. Anyone know where I can get one or am I gonna have to make one?

    Also, rear bumper got ripped off. As in the stubs literally got busted off at the welds. Just get a new universal bumper and weld new stubs on?

  2. #2
    Join Date
    Apr 2011
    Posts
    220

    Default

    Found it...I think. Wehrs bar? Found on Performance Bodies for $90. Now, are the vertical bars always the standard width apart?

  3. #3
    Join Date
    Jul 2013
    Location
    Lost, but way ahead of schedule
    Posts
    1,365

    Default

    I'd say no on a "standard" width apart, especially if you bought the car used. Who knows what's been put on there or who did what. For what little the tubing should cost, and factor in shipping, you'd be far better off making your own...if you can get the resources and are able to get it welded together. Otherwise, MasterSbilt themselves could get the parts you need, but once again...the cost.

  4. #4
    Join Date
    Sep 2009
    Posts
    733

    Default

    Far better off making one.
    10ft of 1" square tube .062 is $25 at my local steel supply all day long.
    Same with 3/4 Square tube which I use a lot.
    Often, they have drops for $5 or less for 4-6 foot leftovers.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 07:00 AM.


Powered by vBulletin® Version 4.2.0
Copyright © 2022 vBulletin Solutions, Inc. All rights reserved.