Results 1 to 3 of 3
  1. #1
    Join Date
    Apr 2014
    Posts
    12

    Default MBH Mastersbilt Rear End/Axle Length

    Hi all. Just picked up a 2013 MBH close to bare frame for an upgrade. Currently running a Smackdown copy. Current car has 33/35 axles. Will this combo work in the new MBH? I’ve heard people say the MBH cars are basically Gen-X fronts and Smackdown rears but I’m not sure what all that exactly means. Any help would be greatly appreciated. Thank you!

  2. #2
    Join Date
    Jun 2007
    Posts
    228

    Default

    Yes 22" j-bar, from right side of lift bar plate to center of frame rail 15.75" increase to 16.25" in the slick. Is what mbh papers we have says. Actually will need a 1" wheel spacer on the lr. Because the paper say 34/35 rear
    Last edited by phenom08; 03-28-2022 at 12:10 AM.

  3. #3
    Join Date
    May 2007
    Location
    Batavia, OH
    Posts
    13,615

    Default

    I think the smack rear comment was based on the 4 link lengths, because as phenom corrected, the rear is a gen x as far as axle lengths. I'd change the tube instead of using a wheel spacer, but that works too. You just have to make note of that inch when measuring from rotors to locate the birdcage.
    Modern Day Wedge Racing
    Florence -1

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 07:47 AM.


Powered by vBulletin® Version 4.2.0
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.