-
Worth the money
I got a msd 6am box which dist should I use
I need more acceration what kind of flywheel should I use that's worth the money
my car over heats should I use a stock fan or a flex trying to use money on right stuff
-
What do your rules allow?
JerryM
-
I ran a lighten steel flywheel and I was wondering about aluiman one
I ran duralast with msd but it doesn't do anybetter that's y I was wondering about msd one
-
Easy answer is your going to get what you pay for. I have ran goldstars, 10,000 RPM, escort and stock. I like the 10,000 Rpm because it seems to be more durable than a aluminum but I have seen people run aluminum for years with no problem. Dist I stick to is the mellings easy to hook up with no problems what so ever
-
MSD will not give you any magic lap times. I used it years ago and got no improvement at all. Spend money on the chassis and get the handling better before you dump cash on MSD systems. I have liked my 10,000 rpm flywheels/ clutches. never a problem.
-
overheating
I have never had an overheating problem... Not once...105 and high humidity... NO problems. Simple....alum radiator, plastic composite 15 inch fan (avail at any parts store) 20- 30 bucks. and I cut 3 of the 6 blades off!! a good shroud with the fan half in, half out..Thats it.. Its all common sense.. Just what youve always heard to do.. Dont shortcut it with a cheap ass used bent fin radiator either. Buy new parts, put them in properly, and you will be fine..If you are running a 2.3 you will need a min of a 3 inch spacer on the water pump. I took mine off a 390 I believe, but hey make them aftermarket and they are delivered to your door. So by the time you spend a day, and 10 gal of fuel looking for one, you could have paid for it.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
All times are GMT -5. The time now is 12:17 AM.
Bookmarks