hydraulic 2300 head

[ford2300builder]

I built this head for a customer and they never picked it up. its a d port closed chamber head with 3 angle valve job and Ferrea stock diameter valves. The springs and retainers are crower and the cam and lifters are from racer walsh (.450 lift). I let a friend run this head one race while I finished his other head. It turned 7800 no problem and led most of the race until he was spun out with 3 laps to go. pm me with any questions. $500.00 and its ready to bolt on.

[mkfnbc]

Where are you located?

[ford2300builder]

Head sold!!!!!----------------