Heres whats left!! Buy 1 piece or all for 1 price!!! MUST GO THIS WEEK

[stunner]

Guys heres the deal. After selling on this forum and several others for the last 8-9 years I am getting out of the parts business. I am doing this as I have taken on weekly promotion of a local racetrack. I want all the parts left in my shop gone by April 1st minus personal items. I am going to do this by selling on this forum and others . I've been blowing things out the door and moved over $20,000 in the last 3 weeks. The stuff is going to sell!! If your interested and serious please call,text or pm. Please refrain from requesting pics of every little item. I DO NOT SELL JUNK!!

NEW Hans device. Its never been used or installed. Date code of July 2009. Its complete and just been sitting on shelf. Its a "sport series" and is a size medium and 20*. Over $695 new list will take first $525

NEW Sweet collapsable steering column. Never ran and brand new with the steering coupler. Lists for $275+. I will take $235

NEW Fluidyne deck mount oil cooler. It has been bolted up to the car but never had any liquids in it or even had a line attached as I switched set-ups before running. Its in the original box. It was $289 new plus tax and shipping. I will take $200 shipped

NEW Cola 4340 billet 3.5 stroke 350 main crankshaft. Its a 2pc rear main sbc. New in box and never been ran. Owner purchased at trade show and never used it. NEW its over $700. Asking $425. Must go

New Fastshaft 29.75" steel driveshaft. New in package. No yoke. Its $195 new. Asking $125

8 good used Fastshafts. The lengths are 27.75, 28,28.25, 28.5,29.25,29.5,30, 31". Some have yokes others dont. Good used shape. Prices range from $65-115

Stealth 750 with 850 baseplate ultralite composite carb. Its a gas carb. Its also just been gone threw and has no laps on it. Asking $825

Proform Alky 750 carb. This has just been gone threw by the guys at performance Auto. Has all new floats, acc pumps, power valves, gaskets, etc... Asking $325

Jim Evans racing 4412 2 barrel carb. This carb has 4 nites on it since it was freshened. It makes excellent smooth power. Has billet metering blocks. Asking $375

9 misc HVH,Wilson, CV products, phenolic carb spacers. Some are brand new others are lightly used. $65 ea or all 9 for $500

3 used fuel regulators. $35 ea

GM Bowtie block. Needs to go to 4.165 bore. Has 350 mains. No sleeves. Its a former Arca block and will need remote filter mount but is setup for wet sump oiling. $850 This is a consignment

Crower 3.875 stroke 400 main small journal (2.00) rod pin 48 pound crank. This is a genuine billet crower crank and has a fresh polish. Asking $375 This is a consignment

Moroso Alum dry sump pan. $275

Stefs alum dry sump pan. $250

50mm Comp Cams roller cam for 4/7 swap along with Crower roller lifters. Grind #475288R-6. 288/296 adv duration. 630 lift. 252/258 at 50. 106 lobe center. Asking $275 for the set.

set of used Isky roller lifters. Good used lifters. asking $125

4 sets of used titanium valves. Asking $150 a set

misc titanium retainer sets

32 gallon ATL fuel cell. Its in nice used shape and has a used frame on it from a GRT latemodel. $275

32 Gallon jaz fuel cell. Its in decent used shape. $75

1 Engine shipping pod. This is basically new. I bought a new Mullins engine last year and they shipped it to me in this pod so its been used once. Its complete with engine mounts. They sell for $325 new. Will take $225

2 complete Quarter Master ULGC reverse mount starter GM triple disc clutch setups. These are complete setups and include the bellhousings, starters, clutches, and throwout bearrings. Niether has been used for 2 years as the owner went to IMCA steel bellhousing setups. No cracks in the bells and disc are good starters have been bench tested. These are $1500+ new. Asking $550 for each setup

Quarter Master 153 tooth GM 2 disc clutch setup. Comes with clutch flywheel starter and magnesium bellhousing. No throwout bearring! Everything is in nice shape. Asking $425

Quarter Master single disc clutch. Its the 7.25" diameter clutch for use with flexplate. Great used shape. Asking $175

Kammler single disc clutch. Its a 9" diamter clutch for use with flexplate. Extremely rare and in great shape. Asking $325

Tilton GM 153 tooth Magnesium bellhousing. Its just the bell. $175

Tilton Ford magnesium bellhousing for OEM flexplate with throwout bearring. Asking $225

Tilton Ford Magnesium bellhousing for oem flexplate. Just the bell. $150

GM cast bellhousing. It has cracked and been repaired at one time and ran with no further issue since. It is IMCA legal as it is a steel bell. $75

3 GM aluminum bellhousings. All good shape with no cracks or welds. $50 ea

2 New Willwood straight vien 1.25" rotors. Never bolted up. Asking $45 for pair

Used 38.25" aluminum Fastshaft driveshaft. Good used condition. $165

Used 34.5" aluminum Fastshaft driveshaft. Has about a dime size dent. Very useable or excellent spare. $85

1-14" Real aluminum beadlock wheel. Outer engine is bent in slightly but very useable as is and would make an excellent spare. 5" offset. Asking $95

1-12" Weld aluminum beadlock wheel. Its in good used shape. 3" offset. Asking $85

1" aluminum wide 5 wheel spacer. Asking $45

Pair of Birky aluminum birdcages. They need alittle repair. Nothing to major. Asking $175

Many NEW and used misc aluminum birdcage bolt on parts and pieces. Tons of stuff!!!!

Rayburn aluminum swingarm birdcages. Asking $65

TWM roller bearring 11.5" upper control arm with howe balljoint. In like new shape. Asking $45

2 Wilwood cailper sets. 5.25" bolt pattern. matched set of 4. Asking $175 ea set

Many misc New and used Wilwood calipers $20-90

7 Real and Weld outer beadlock rings. These are either new or in excellent used shape. $85 a piece new. Asking $25ea or $125 for all 7

Afco 7" aluminum coilover double ajustable shock. Complete with coilover kit. $125

3 Carrera aluminum coilover rebound adjustable shocks. 1 has bent shaft. Asking $175 for all 3

31 misc coilover springs. $15ea

Older Sweet rack with in shaft servo. its a 18.25" rack and a 3.4 ratio. Asking $250 for rack and servo

Used Styles Tri-Y LS header for Mastersbilt, GRT, etc. Only have LS. Fits 13,15,16, 18* heads or any other with the straight pattern. Will not fit 23* $125

2 used Masterbilt liftarms. $40 ea

3-2" offset Basset 5x5x8 beadlock wheels. In good shape. Asking $85ea

2-2" offset Aero 5x5x8 beadlock wheels. Both excellent. Asking $85ea

4" offset 5x5x8 Basset chrome wheel. Its new and never had a tire on it. Asking $50

1 Harris spring with biscuit. $85

3 Inner mud plugs for LR. There are 2- 4" offset and 1- 3". One is new other 2 are slightly used. Asking $15 ea or $40 for all 3

Pair of billet aluminum lug pattern adapters. These are used to change your stock bolt pattern hubs from 4.5 or 4.75 to the 5x5 pattern. They also make your front end 2" wider. They sell new for $129. Asking $60

14 misc axles. Some are gundrilled others are solid. Good used axles. Asking $30 ea

15 used sets of quickchange gears. Asking $20 a set

2 used Bowtie GM cast iron "marine" high rise intakes. Asking $175 for the one and $125 for other.

Power Plus Hurricane Intake (Edelbrock Super Victor 2925 copy) Its used but no damage. Asking $110

Edelbrock Torker intake $75

2 good used "diamond" tire grinding discs. Asking $25 ea

2 used sets of black simpson seat belts. $20ea

set of used black simpson belt pads $10

7 used Moroso foam prefilters for air cleaner $5 ea

1 set of aluminum pulleys for sbc with short water pump. Asking $40

1 set of aluminum pulleys for sbc with long water pump. Asking $40

1 used Edelbrock sbc fuel pump $35

1 used Carter sbc fuel pump $30

5 used qc gear boxes. Asking $10 for all 4

used GM system 1 cleanable oil filter. Asking $35

Nice used Simpson racing helmet with custom paint. Asking $85

New blue neck collar. Its the foam style with blue cover. Never out of plastic $20

2 used neck braces. 1 blue and 1 black. $5 ea

Like new. Show no to little signs of use Impact size 9.5 driving shoes. Black in color. Asking $45

Used simpson blue driving shoes. Size 10. Asking $25

Used Simpson black with chrome heat shield in size 11.5. Asking $35

New bead breaker. $20

Carb hats 1-cv Asking $5

2 jaz overflow tanks. Asking $10ea

6 NEW Napa gold 14x4" air filters. Its a sealed case. I switched to the r2c this year. $50 for the case

Hex steering wheel couplers. Asking $10ea

1 used 3 gauge panel. has fuel pressure and water temp gauges missing oil pressure. Asking $30

1 used 4 gauge panel. Has fuel press, oil press, water temp. Missing oil temp. Asking $45

Falcon coupler for sbc. Asking $35

Bert 2 pc coupler for sbc. Asking $65

Brinn 1 pc coupler for sbf. Asking $45

used reverse mount starter. bench tests good. Asking $75

used steel quickchange spool with ring gear. Asking $85

6 Blade fan. Asking $10

box of 7-10 misc fan spacers. asking $20

3 used throttle pedals. $10ea

2 used 1/2" sure seal for air cleaner bases. $5 ea

13 boxes of white explosion rivets. Asking $10 a box

engine build stand. $50

600 afco 5" mod spring $20

800 Swift 5" mod spring $35

This is basically everything I have left as im getting down to the end. I do have misc things like weight clamps, motor mounts, fuel filter mounts, lug nuts, breather covers, air cleaner bases, lids, misc hiems and bars, 9" parts , tons of aeroquip lines and fittings.

Like said above everything is going down the road asap. If you want a package deal on everything jsut give me a call for a current price as things sell. I am going to sell piece by piece for this week only then take the highest offer I get on the remaining items the week after as I want it all gone!! Call text or pm for more info. 815-990-8865

[74racer]

what kinda axles do you have? im in need of 9 in. axles, 2 or 3, 28 spine, 29 1/2 in.