good cam options for 355

[hobbyracerbn2]

what would be a good lift of cam and give it more torque and pull for a 355..i got a hurricane intake on it with a 750 demon carb with a good steel lighten crank..good bottom end...i run steel head late model just need ideas to at least stay up with these guys for time bein till we get our big motor done and the heads are world products straight plug thanx

[dynoman14]

What are you running now that you want to make better???

[hobbyracerbn2]

i was needin advice on what cam we should get for it to make it pull good..track is 1/3 mile banked track momentum track..dad said it was a small cam pulls to 6500 i dont now if i need a bigger cam or smaller..its got to be a solid lift..i mean what would u put in it?

[andy16]

with world heads and flat top piston a good starting point would be duration @.050 250 int 260 ex w a lobe seperation between 104* and 106* w around .550 lift. in my humble opinion.

car over 2800 lbs -104*ish
car under 2800 lbs-106*ish
over 7500rpms+ 107*ish