|
|
-
Motor?????
sport mod type class, 2350 lbs minumum. running kk704 tire 360 cubic inch displacement or less. Compression of 9.5 or less. 1% error.
Stock type, stamped rocker arms only. No roller tip rocker arms.
48 lbs crank, 2 bbl rochester,stock intake. vortec 2bbl can be used, intakes must be untouched.
1.250 valvespring, with 5 coils. ,MAX RPM 7000 ON PILL.
I need recommendations on motor builders, or cam that would work for this class. what are your recommendations?
-
Originally Posted by 68stcracing
sport mod type class, 2350 lbs minumum. running kk704 tire 360 cubic inch displacement or less. Compression of 9.5 or less. 1% error.
Stock type, stamped rocker arms only. No roller tip rocker arms.
48 lbs crank, 2 bbl rochester,stock intake. vortec 2bbl can be used, intakes must be untouched.
1.250 valvespring, with 5 coils. ,MAX RPM 7000 ON PILL.
I need recommendations on motor builders, or cam that would work for this class. what are your recommendations?
Around 510 lift and 245 duration.
Need to reread your rules. Looks like a stock motor class and the crank is way out of place.
-
what do you mean out of place? they allow any piston, any rod.
-
Originally Posted by 68stcracing
what do you mean out of place? they allow any piston, any rod.
Maybe its a regional thing. I find it odd a class would allow a 48lb crank and any rod/ pistons, but limit the carb to a rochester and stock rockers.
Sounds like you can build a $5000 ultra light weight short block and add oem top end to it. I see a big loophole for the racer with money.
-
what type of top end and cam would you recommend for this set up? pm me if you like.
-
vortec 2bbl can be used
Do you mean vortec heads?
What is the head rule?
Hyd or mech cam?
I try not to PM, what you need to know will help others.
-
23 degree cat iron head, vortecs are allowed, as well as mercruiser intakes which are near impossible to find where i live. solid cam/lifters, intakes are to be untouched
-
where can i get race ready vortec(both regular and bow tie) heads for a two barrel motor, what cam recommendations does everyone have, 1/4-3/8 mile dirt oval
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
All times are GMT -5. The time now is 10:37 PM.
|
|
Bookmarks