Results 1 to 5 of 5

Thread: carb help

  1. #1
    Join Date
    Dec 2008
    Posts
    13

    Default carb help

    i have a quick fuels 650 carb it will not stop leaking fuel out of the right front booster when it is running have checked float level, power valve , but still leaks any other suggestions thanks

  2. #2
    Join Date
    Jun 2007
    Posts
    3,123

    Default

    Quote Originally Posted by biggdawg36 View Post
    i have a quick fuels 650 carb it will not stop leaking fuel out of the right front booster when it is running have checked float level, power valve , but still leaks any other suggestions thanks
    Pull the needle and seat and blow it out with air. Even a very small spec of dirt or something can hold it open and let fuel through.

  3. #3

    Default

    I had the same issue with the same carb. problem was it had the wrong metering block gaskets. the incorrect gasket had a small hole that wasn't suppose to be there (3 circuit carb ). would seap over night and empty the bowl . needle an seat can also do it if there is something in it

  4. #4
    Join Date
    Dec 2008
    Posts
    13

    Default

    ok i have changed the needle and seat i thought it may be that as well ill check the gaskets to see if it all lines up thanks

  5. #5

    Default

    if its a 650 . the metering block gaskets should have a circle cutout for the power valve. not the Dshape cutout .

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 01:07 PM.


Powered by vBulletin® Version 4.2.0
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.