Originally Posted by
dirttrackrocker
I have brand new calipers on the front and both front brakes are dragging causing the car to push. I have checked for pinched lines and nothing seems bent or crooked on the spindles or caliper mounts. Any ideas why they don't seem to release all the way?
there is a return bleed on the MC that is covered up by the Mis-adjusted MC rod.....make sure the piston returns all the way back ( bias bar is free at static)...
" Most of my drivers have been new to 4 link stuff and I believe most of their chassis issues are really my driver issues....... "
see ya
johnny v
Bookmarks