-
Svo intake
Anyone out there run a Esslinger svo intake on there oval port steel head? If so what kind of mods are required to make it work? Thinking it might work with a little work but don't want to buy one if its not going to.
-
-
Are the ports spaced the same on the esslinger svo intake and the ranger one? Both round right? Is it just the bolt holes are different but the ports line up?
-
Originally Posted by
toynv
Are the ports spaced the same on the esslinger svo intake and the ranger one? Both round right? Is it just the bolt holes are different but the ports line up?
The SVO intake port centerline is 4.166 I believe on the SVO intake and stock is everywhere. Bolt holes aren't close either.Putting an SVO intake on a stock head is Like trying to put a square peg in a round hole.
BUCKLE UP NOW, YA HEAR?
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
All times are GMT -5. The time now is 08:15 PM.
Bookmarks