-
07 mastersbilt
When updating a 07 smack to a gen x does the lower a-frame hook up points change and does the right front rail have to be raised or is it already raised on the 07. I see that the upper hook up points are not even close to the same but not sure about the lowers. Are any of you guys running the smack rear with the gen x frontend and doing well with it . Thanks for any help
-
mastersbilt
Originally Posted by
01_4_life
When updating a 07 smack to a gen x does the lower a-frame hook up points change and does the right front rail have to be raised or is it already raised on the 07. I see that the upper hook up points are not even close to the same but not sure about the lowers. Are any of you guys running the smack rear with the gen x frontend and doing well with it . Thanks for any help
Just got off the phone with mastersbilt and they said theres no update for a 07 or any other smack to a gen x. There two total different animals.
-
-
You can update an 07 smack to the S7 front end. This is just different spindles, control arms, and tie rods on the right side and different spindle on the left side. Chassis pickup points are the same.
Some people think that this is GenX front end on a smack car but it isn't.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
All times are GMT -5. The time now is 08:22 PM.
Bookmarks