-
2300 head
what is the thickness of a stock 2300 head i mic mine from the bottom to were the valve cover sits and was 3.768 and its been shaved enough to were the triangle spot onthe bottom of the head is smooth
-
stock is 3.800..so yours is milled 38 thousandths...not much at all
No matter how hard you try...you cant fix stupid!!!
If you build it right...it will turn left!!!
www.raceidaho.com
-
it was measued wrong went back and checked th combustion chambers and they r at 40 cc
-
Originally Posted by
mus06
it was measued wrong went back and checked th combustion chambers and they r at 40 cc
that has nothing to do with the height from the head gasket surface and the valve cover gasket surface. cutting the head will change the chamber size but you still didn't say what the new measurement was. if the oil passage on the head surface was smooth i would say it has been cut at least 0.100 or more.
olin
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
All times are GMT -5. The time now is 02:10 PM.
Bookmarks