Imca Hoosier g60 tire help

[modfan000]

I need all the info I can get for the g60 tire on what to do to run them. I'm new to this tire an all I've ran in the past is the ump emod tires. What do you do to prep a g60 an are ther diff compounds an heights like the emod tires I know

[DANNY]

Here is a good thread to look at:

http://www.4m.net/showthread.php?259...=tire+grinding

They aren't as bad as they say. They don't like heat and after each use like a good clean off and or grind helps... I sipe the help out of mine if you can that helps too... There are plenty of others that have "tricks" for them.

[modfan000]

Can Anybody else help

[Confused?]

This is a few years old but it's still useful.

http://www.hoosiertire.com/otdtire.htm

I sipe the RR around the tire for the first 3 rows. The others are done across the tire. I put 1 sipe in the center for the outer rows(RR) and 2 across the blocks for the rest of the tire. On the LR, I put 2 siped across the blocks, from inside to out side.

I also lightly grind/sand all 4 tires with a 24 grit sanding disk to remove the heated areas.