-
Rear shock mounts on metric
If u could move the mounting location on the rear shocks on a metric where would u move them
-
Even with the top of the axle on the LR; as low as possible on the trailing arm mount on the RR. This will give you more extension before topping out on the left and more compression before bottoming out on the right.
I used to weld in about a 2 inch extension on my LR shock shaft to keep it from topping out.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
All times are GMT -5. The time now is 07:19 PM.
Bookmarks