-
New Tire Prep
I have recently purchased four new Hoosier Emod tires 3 D's and 1 A. I was wondering what all needed to be done before I put them on track. I.E. Do they need to be cleaned or are they good run as they are? I have never ran brand new Hoosiers before, always ran hand me downs from the neighbor that runs a modified. Do they need heat cycles? Do they need to be buffed before hand? Any help I can get would be greatly appreciated.
Thanks, Adam
-
Sipe the snot out of the A, then scuff it, just enough to take the manufacturing glaze off, then for the D's and the A both, hit them with diluted simple green and rinse them well with a powerwasher.
#72W U.M.P Stock Car
-
You can also lightly scuff the D's for a little extra initial traction, but they are soft enough that it wont be much of a difference.
#72W U.M.P Stock Car
-
Thanks, I appreciate the help.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
All times are GMT -5. The time now is 11:56 AM.
Bookmarks