-
engine questions
deciding if i should change some things on my engine for next year. currently i am running a 355 with around 9:1 compression(from what i was told). from the things i know it has a jr motorsports 108 cam ( if anyone knows specs on the cams thatd be nice ). unsure of what internals it has. rules are 360 ci max, 9.5:1 compression, stock steel rocker arms, cast iron 2 bbl intake, 2 bbl holley 4412 or rochester, no roller cams, 7000 pill, car is an x mod weighing around 2500 lbs. running a 3/8 mostly tacky track. any reccomendations or ideas will help.
-
I am very familiar with the PRC 108 camshaft what are you looking to change about the engine more bottom end or top end driveablitly etc?
-
just do a search for PRC108 camshaft. It will bring you to Karl's performance, there you will find all the specs on that cam
-
Awesome thanks for the info on the cam. Well the car runs good just need to get a lil more out of it. Feels a lil sluggish coming out of the turns. Usually turning around 6500-6600 rpm with a 633 gear.
-
650 gear will pull you harder, or degree the cam
-
Find out what's inside…. lighter pistons… low tension rings… better cam will all help.
Find those cam specs then call Mike @ Jones Cams, Charles @ Camcraft or Bullet. Any of those guys can grind what you need...
-
..............................
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
All times are GMT -5. The time now is 12:33 AM.
Bookmarks