Results 1 to 6 of 6
  1. #1
    Join Date
    Jun 2007
    Location
    Hampton,Georgia
    Posts
    293

    Default 05 GRT Front End

    Any one know the rack width for a 05 GRT. Maybe even the Tie Rod length?

    My car will not turn left very far before the rack is out all the way.

    But will turn to the right a very long ways.

    I have not seen any documents on the proper lengths.

    Car is fast and handles well. Just kind of weird when I pull in the pits and it won't turn left enough to get in behind trailer.

  2. #2
    Join Date
    May 2007
    Location
    Kansas
    Posts
    1,943

    Default

    Quote Originally Posted by N2Racin View Post
    Any one know the rack width for a 05 GRT. Maybe even the Tie Rod length?

    My car will not turn left very far before the rack is out all the way.

    But will turn to the right a very long ways.

    I have not seen any documents on the proper lengths.

    Car is fast and handles well. Just kind of weird when I pull in the pits and it won't turn left enough to get in behind trailer.
    unless, it's a frye car it should be 18.25". You can double check this by measuring between the lower control arm mounts and it should be 18".

    Ideally the rack should be centered with the wheel straight, meaning both sides of the rack should extend the same amount past the inner pivot of the lower control arm. You can fudge this a little if you need to turn more one way then the other or if they don't have the rack plate in the right spot.

    Keep in mind that moving the center on the rack, will change the bumpsteer if you set it with where it is now.

  3. #3
    Join Date
    Jun 2007
    Location
    Hampton,Georgia
    Posts
    293

    Default

    I have 17.75" between the lower control arm mounts. Center to center

    I also have the 19.25 rack.

    Thanks for the response.

    I bought car like it is but I am going to try to fix centering issue and redo the bump. The Sweet rack has the slotted ends.
    Last edited by N2Racin; 05-15-2015 at 01:08 PM.

  4. #4
    Join Date
    Dec 2014
    Location
    pa
    Posts
    218

    Default

    my 05 and 07 grts had the 191/4 rack in them they both steered further to the right then left, they told me turn all the way right and set right link that the tire is about a inch from touching the header and make your left to fit, probably the way yours is now.

  5. #5
    Join Date
    Jun 2007
    Location
    Hampton,Georgia
    Posts
    293

    Default

    What will having a wider rack do?
    if bump is correct?

  6. #6
    Join Date
    Jun 2007
    Posts
    3,123

    Default

    Quote Originally Posted by N2Racin View Post
    What will having a wider rack do?
    if bump is correct?
    It won't be correct anymore.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 02:25 AM.


Powered by vBulletin® Version 4.2.0
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.