-
Ride height settings
What's the correct way to measure front ride heights on stock front clip chassis when measuring by ball joint. What's measurement for rf and lf? Thanks
-
Anybody??? Camaro clip, stock lowers tube uppers.
-
lower a arms LEVEL is a good start
That would be center of inner bolt to center of bj socket
-
Measure from center of A arm inner mount bolt to the ground. Measure from center of lower balljoint pivot ball to the ground (You have to figure out where that is and mark your A arm so you will be consistent with your measurements). You generally want the RF an 1/8th to 1/4 in higher outside to inner and the LF level to 1/8th lower outside to inner.
Dave
2012 UMP Stock Car National Champions.
2013 UMP Modified Rookie of the Year
2014 Kankakee Speedway UMP Modified Champion
2016 Fairbury American Legion Speedway UMP Modified Champion
2016 Kankakee Speedway UMP Modified Champion
2016 UMP Modified, Northen IL Regional Champion
2018 UMP Modified, #2 National Points Standings
Like us on Facebook,
https://www.facebook.com/McKinneyMotorsports
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
All times are GMT -5. The time now is 04:30 PM.
Bookmarks