I sorta figured it was a brake bracket... thanks for confirming that. Might need that limiter bracket someday... I'll put it on the shelf. Being a low buck guy I seldom toss anything in the trash...
Thanks.
Member of the Luxemburg Speedway Hall of Fame
Class of 2019
I'll check it out... I know Bert has made hubs and such in the past.
This deal got me 5 AFCO twin tubes, one PRO twin tube and one AFCO bulb shock plus misc c/o kits, shock bearings and such for $100.00... going to have re-valve a few since most are ez up's for the LR but I got a couple 7 " that are perfect for the front. So now I have a total of nine shocks for my old buggy (two fresh qa1's in stock, too) for a total investment of $120.00... right in line with my no-dollar budget!
Thanks.
Last edited by Krooser; 12-17-2016 at 01:01 PM.
Member of the Luxemburg Speedway Hall of Fame
Class of 2019
I think the left one is for an old Bert birdcage where you could unbolt the shock bracket and put bolt thru this clamp to make it clamped to tube instead of birdcage. Most chain limiters rotate on tube and the notch in bracket is for slug to lock into tube for no rotation.
Bookmarks