Most people are measuring the .015 in the wrong place. The .015 is with the throttle wide open. You need .015 left of pump arm travel after you reach full throttle, not before you start actuating the throttle. You should not have any binds.
Was told overkill for a 2 barrel? I’m just learning. Carbs interest me and I like doing things myself. My friends who have store bought 4412’s have 30cc pumps. If that means anything. Am I screwing up?
Found my issue thanks to the Holley website. The brown cam I was trying to use is 50cc only. Ordered a 30cc cam kit and down loaded the cam curves chart. Now to do some studying and flow benching.
Bookmarks