|
|
-
Lonesome Pine raceway going dirt
Asphalt track in coeburn Virginia putting red clay down. A nice facility curious to how it will race seeing as it will be the closest track to here
2018 races: 11
Atomic (2), 201(5), Eldora(1), Florence (3)
-
Clay on asphalt, or taking out the asphalt?
-
Looking at their FB page it appears they are laying red clay over pavement.
Member of the Luxemburg Speedway Hall of Fame
Class of 2019
-
If you were a track owner and you were looking at going from asphalt to dirt would you lay the dirt over the asphalt or dig up the asphalt and put new clay down
-
If I 'owned' it I would dig up the asphalt... Friendship speedway is dirt on the pavement, taken a lot of work to get the surface good- before it was paved the surface was much better (they have come along way with it over the last few years). I remember I-70 (dirt on top of asphalt) having hole's so big you could see the asphalt under the dirt, fun place to watch a race but man would it come apart.
-
Originally Posted by racincowboy02
If you were a track owner and you were looking at going from asphalt to dirt would you lay the dirt over the asphalt or dig up the asphalt and put new clay down
Mill it up down to the existing dirt. And you could leave the millings on site for parking, or sell them. You’ll always fight the asphalt coming up, always.
Up in the air who my next “favorite” driver is. Really losing hope on Bloomer getting anywhere back to “normal”.
-
That makes a lot of since i would do it that way myself that way if you was to need new clay to bring the surface up to meet the base of the wall it wouldn't be that bad to do
-
Friendship is the perfect example of why they should dig the asphalt up. More nights than not that place turns rough and I’ve NEVER seen it not be dusty. I’d put it right with Tyler county on the dust aspect
-
C&B
It's not always necessary to remove the asphalt to have a satisfactory dirt track. Just gotta make sure you lay enough clay that it doesn't become an issue. For instance, Fulton Speedway and Albany Saratoga Speedway were asphalt tracks and was converted into dirt tracks, and the asphalt was never removed on either. There don't have issues with the surface peeling.
Follow me on Twitter: @JoshBayko
Guerrilla Racing Junkies!
-
Friendship
Agreed switchback.........I've never seen it when it wasn't dusty, but they have gotten a much better handle on track conditions over the past few years.
It's another really cool track in the Carolina's for fans to watch a race at.......that backstretch view from the outside parking area is awesome.
Where is the move over flag when you need it?????
-
Friendship was the reason I asked the question, but in my opinion, they have almost got it figured out. That place is nowhere near as bad as Tyler County, IMO.
-
C&B
It's not always necessary to remove the asphalt to have a satisfactory dirt track. Just gotta make sure you lay enough clay that it doesn't become an issue. For instance, Fulton Speedway and Albany Saratoga Speedway were asphalt tracks and were converted into dirt tracks, and the asphalt was never removed on either. There don't have issues with the surface peeling.
Follow me on Twitter: @JoshBayko
Guerrilla Racing Junkies!
-
Originally Posted by Josh Bayko
It's not always necessary to remove the asphalt to have a satisfactory dirt track. Just gotta make sure you lay enough clay that it doesn't become an issue. For instance, Fulton Speedway and Albany Saratoga Speedway were asphalt tracks and was converted into dirt tracks, and the asphalt was never removed on either. There don't have issues with the surface peeling.
Utica rome was in that same situation around the same yrs. I remember fulton changing. Saw some good asphalt races there too. Idk if utica rome left there straights down as they made a bigger track. They may have dug it all up. Good times there in late 70's early 80's!
THE REAL SLIDING SIDEWAYS!
-
I wouldn't use red clay to start any dirttrack.
-
Red clay is almost as bad as asphalt. If you're going to switch to dirt, use DIRT.
-
Originally Posted by chopter
I wouldn't use red clay to start any dirttrack.
Red clay makes for just as good a surface as any if you prep it the right way.
Follow me on Twitter: @JoshBayko
Guerrilla Racing Junkies!
-
Originally Posted by Josh Bayko
Red clay makes for just as good a surface as any if you prep it the right way.
Correct. Port Royal, Lernerville, and the Atomic that was in Tn were/are pretty good.
Up in the air who my next “favorite” driver is. Really losing hope on Bloomer getting anywhere back to “normal”.
-
Originally Posted by Josh Bayko
It's not always necessary to remove the asphalt to have a satisfactory dirt track. Just gotta make sure you lay enough clay that it doesn't become an issue. For instance, Fulton Speedway and Albany Saratoga Speedway were asphalt tracks and were converted into dirt tracks, and the asphalt was never removed on either. There don't have issues with the surface peeling.
While I’m sure it can be done Josh, I wouldn’t trust it, plus it would create some nice pit areas, parking areas, if you milled them up.
I’m sure with enough CLAY, any track would be good. Sharon held up till right before they shrank it. It was showing asphalt then.
Up in the air who my next “favorite” driver is. Really losing hope on Bloomer getting anywhere back to “normal”.
-
Originally Posted by chupp n bloomer fan
Correct. Port Royal, Lernerville, and the Atomic that was in Tn were/are pretty good.
Sharon is finally starting to figure their’s out too.
Follow me on Twitter: @JoshBayko
Guerrilla Racing Junkies!
-
I used to assume red clay would work too, until I moved to Georgia a few years ago. I haven't seen a good, consistent red clay surface yet, in GA, SC or Bama. And the ones previously mentioned, that I've attended, aren't truly red clay. They're at least mixed with dirt -- except Sharon and Port Royal, which I haven't been to. Even Atomic in Tennessee, was a different kind of track than what I see down here. Maybe it's the promoters or the heat, or whatever, but the racing on the real red clay is terrible.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
All times are GMT -5. The time now is 03:55 PM.
|
|
Bookmarks