Originally Posted by
Cranky
What is the best way to keep the brake pads away from rotors or to return to a non touching position? I have Superlite calipers on with 1.25 rotors after practice or a race they are tight against the rotors not allowing the rear end to turn free. It'll turn but has resistance due to brakes touching the rotors? Any help would be appreciated.
Keeping the pistons as far in the bore as possible. As the bores wear, the pistons start sticking. The farther out they protrude, the quicker the bores become out of round. Keeping them cool helps too.
Modern Day Wedge Racing
Florence -2
Atomic - 2
Bookmarks