-
2300 hyd cam in solid head?
Ok ive heard from a few guys this year that you can run a hydraulic cam in a solid lift head. Any truth to this. I got a solid head with a 510 cam thats to big for our rules. And another head that is cracked. Could I take the followers and cam and throw in the solid?
-
yes u can u just have to set the lash. run about .010 intake and .012 ex
jared flower
-
Originally Posted by
Ministock25
Ok ive heard from a few guys this year that you can run a hydraulic cam in a solid lift head. Any truth to this. I got a solid head with a 510 cam thats to big for our rules. And another head that is cracked. Could I take the followers and cam and throw in the solid?
hyd. to solid no ! solid to hyd. yes!! ram speeds are different ! if it works cam want last long hyd. is to soft of metal!
-
-
Run a racing oil and you'll be fine
-
You can run a hydraulic cam in a solid head. I did it for years. I had .005 lash and it ran great. I never tried a solid running on hydraulic though. I would think the ramp would be different.
-
soild over hyd head
what does it gain over just run a hyd cam say i am running a 480 hyd head shaved to the may stock valves no port and polish now i put a 480 soild cam in the same head what would make it better then before
-
Originally Posted by
mus06
what does it gain over just run a hyd cam say i am running a 480 hyd head shaved to the may stock valves no port and polish now i put a 480 soild cam in the same head what would make it better then before
hyd. cams have diffrent ram speeds than solids the grinds are different!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
All times are GMT -5. The time now is 07:58 AM.
Bookmarks