Tweet
Eagle forged stroker crankshaft. It is std rods and mains. But it needs the mains turned. https://m.summitracing.com/parts/esp-435035625700. 450 oboI do have the rods and pistons from the engine. The reason I tore it down is because the classes rules. I haveven scat 6d 6 inch rods and hrc forged pistons tooI got the engine with a car I got. It ran good had good oil pressure the reason I say the mains need machined is because you can see a little imperfections. You might be able to Polish it and be good.Saginaw 3 speed. 150 oboSteel bellhousing. 50 oboMisc brake calipers. 25 eachBlack front rocket frame with spindles 150I want this out of my driveway lolFuel cell no leaks. 75 oboKnock off rocket one piece right side lower control arm. 80 oboWilwood pedals front mount 50 for the clutch and brakeWoodward rack and servo. needs rebuilt. Mainly the bushings and boots. No leaks and worked goodI do have the rest of the pieces minus the boots and bushings. It is 3.66 and was on a black front 100 oboProform starter 75 eachKirkey seat 17 inch with covers 75 oboAdjustable control arm pieces 40 oboWilling to trade too. Looking for msd box, distributor, coil, bert aluminum bellhousing complete with idler. Steering wheel. Water pump. Holley 650 carb. Driveshaft for a blue gray rocket with a bert. Full containment seat 14 inch Good pit stands. Rocket parts shocks etcPm or call or text 865-235-2522. I can text pics. I'm in kodak,tn