Tweet
FULL THROTTLE INNOVATIONS LLC. “Announcesâ€
BUILD YOU OWN! “Specialâ€
Have you been thinking, “I CAN BUILD THATâ€!
Well there are a few things that are tough to find, buy and build.
Like the good durable direct drive motor, wheel plate and shaft connector,
pillow block bearing setup, Pinned needle roller & misc. items.
PROBLEM SOLVED! Order them form Full Throttle Innovations LLC.
Here is a list of the same items we use and
items you might need to get started building your own.
#1 - Motor with angle mounting bracket ----- $417.50
#2 - Pillow block Bearing w/ Riser, shim kit and hardware ----- $17.50
#3 - 5 x 5 Wheel Plate w/ 3 studs Shaft & Coupler (painted) ----- $87.50
Or - 5 x 4-3/4 Wheel Plate w/ 3 studs Shaft & Coupler (painted) ----- $92.50
#4 - Set of 2 – 6†wheels, washers & clips ----- $9.75
#5 - 18/3, 9 ft. 6 in. 110 volt cord ----- $7.50
#6 - 3/8†x 2†Clip Pin (Ea.) ----- $2.75
#7 - 4†x 4†Galv. Elec. Box w/painted cover, cord grips, switch & receptacle -----$12.75
#8 - Aluminum cover (white or Black), mounting tubes & screws ----- $22.50
#9 - Pinned Needle roller with bearings and hardware ----- $107.50
#10 - Variable Speed Foot Control ----- $57.50
That should get you started!!
Depending on order size, receive a “Free†Apron or a pair of Mechanic Gloves.
All freight is extra. Will figure when you know what you want.
Cash, Money order or PayPal (add 3%).
Call, Text or E-mail for more info and pictures.
Contact Jim with Full Throttle Innovation, LLC. / 622 West Mary / Beatrice, Ne. 68310
Call or Text -- Cell # 402-239-9282
E-mail -- jjurgens22@Gmail.com
Or E-mail -- jimj@midwestlivestock.com
BUILD YOU OWN! “Specialâ€
Have you been thinking, “I CAN BUILD THATâ€!
Well there are a few things that are tough to find, buy and build.
Like the good durable direct drive motor, wheel plate and shaft connector,
pillow block bearing setup, Pinned needle roller & misc. items.
PROBLEM SOLVED! Order them form Full Throttle Innovations LLC.
Here is a list of the same items we use and
items you might need to get started building your own.
#1 - Motor with angle mounting bracket ----- $417.50
#2 - Pillow block Bearing w/ Riser, shim kit and hardware ----- $17.50
#3 - 5 x 5 Wheel Plate w/ 3 studs Shaft & Coupler (painted) ----- $87.50
Or - 5 x 4-3/4 Wheel Plate w/ 3 studs Shaft & Coupler (painted) ----- $92.50
#4 - Set of 2 – 6†wheels, washers & clips ----- $9.75
#5 - 18/3, 9 ft. 6 in. 110 volt cord ----- $7.50
#6 - 3/8†x 2†Clip Pin (Ea.) ----- $2.75
#7 - 4†x 4†Galv. Elec. Box w/painted cover, cord grips, switch & receptacle -----$12.75
#8 - Aluminum cover (white or Black), mounting tubes & screws ----- $22.50
#9 - Pinned Needle roller with bearings and hardware ----- $107.50
#10 - Variable Speed Foot Control ----- $57.50
That should get you started!!
Depending on order size, receive a “Free†Apron or a pair of Mechanic Gloves.
All freight is extra. Will figure when you know what you want.
Cash, Money order or PayPal (add 3%).
Call, Text or E-mail for more info and pictures.
Contact Jim with Full Throttle Innovation, LLC. / 622 West Mary / Beatrice, Ne. 68310
Call or Text -- Cell # 402-239-9282
E-mail -- jjurgens22@Gmail.com
Or E-mail -- jimj@midwestlivestock.com